1. Performance characteristics

The machine is easy to operate, reliable in performance, technologically advanced, and easy to maintain;

This machine is mainly used for cutting aluminum door and window corner code profiles and mullion connectors;

Using the Omron control system from Japan, with a high degree of automation;

The cutting tool adopts a hard alloy saw blade, which has high cutting speed, high productivity, and high machining accuracy;

The feed motion pair adopts linear motion bearings, which have low motion resistance and high accuracy;

The feeding mechanism adopts an automatic feeding system, which is stable, reliable, and efficient;

The work clamping and sawing advance and retreat are controlled by a pneumatic system, which is easy to operate, safe and reliable, and has high productivity;

Only one clamping is needed to achieve continuous cutting of 6-meter corner code profiles;

The control system is equipped with a digital counter, which can set and record the number of cutting sections to prevent excessive cutting and reduce losses.

Power supply: 380V 50Hz

Motor power: 2.2Kw

Motor speed: 2880r/min

Working pressure: 0.6-0.8MPa

Air consumption: 200L/min

Automatic feeding length: 3 ~ 250mm

Sawing length: No limit when selecting manual

Saw blade feed speed: 0-3m/min

Saw blade specification: ø450×ø30×3.5×Z120

Cutting width and height: max115mm× 175mm

Cutting surface flatness: ≤0.10mm

Cutting profile perpendicularity: ≤0.1mm

Cutting surface roughness: Ra12.5μm