1. Performance characteristics

Suitable for cutting aluminum doors, windows, and curtain wall profiles, as well as for cutting corner code profiles;

The feed system adopts imported linear bearings for motion, with high precision and good stability;

The gas-liquid damping cylinder achieves uniform feed speed regulation and smooth motion, while the high-precision spindle ensures stable operation of the saw blade;

The length measurement uses a magnetic shed system, digital display, display screen, red font, and is not limited by light;

The feed system adopts imported linear bearing motion pairs, with high precision and good stability;

The two saw heads can automatically switch angles, achieving angle cutting of 450 ° and 90 ° profiles. The two saw heads can work separately or simultaneously;

The electrical system is equipped with phase sequence protection. In the event of a phase loss, disconnection, or incorrect item in the machine, the machine will not be powered, protecting the saw blade, motor, and personal safety;

The angle control adopts dual electric solenoid valves, and the angle does not change when the power is suddenly cut off;

The power-off profile is tightly pressed and not loosened to protect the safety of workers;

Exclusive improvement of fan material positioning device, ensuring a cutting accuracy of 45 degrees for cutting fan materials;

Exclusive improvement of short material cutting with one person operation, neither touching the saw blade nor warping the material, especially in the fan material;

● Optional manual arbitrary angle device, capable of cutting at any angle between 90-45 degrees, suitable for cutting special-shaped windows, sunrooms, and curtain wall profiles.

Power supply: 380V 50Hz Power: 2×2.2Kw

Motor speed: 3200r/min Working pressure: 0.5-0.8MPa

Air consumption: 200L/min Saw blade specification: 500* 30

Cutting length: max4200mm min400mm Cutting height: max135mm45°max300mm90°

Sawing Angle: 45° 90° Dimensions: 5680×1500×1600mm