Which preparations should be made before the installation and commissioning of the broken bridge aluminum door and window equipment?

Which preparations should be made before the installation and commissioning of the broken bridge aluminum door and window equipment?

Many aluminum doors and Windows manufacturing enterprises have not really operated before buying the bridge aluminum doors and Windows equipment, so here to introduce some details of the installation and debugging of doors and Windows equipment, prepare in advance to facilitate the manufacturer's technical personnel to the factory commissioning and installation.

First, electricity. Voltage 380V is the normal voltage of the general door and window mechanical equipment, the voltage must be stable, the line will not affect the use of equipment and personnel operation, the ground line should be protected with a shield.

Second, gas supply. Because the pressing material of the door and window equipment should ensure sufficient air supply, it can be better used, which is the basis to achieve cylinder compression. Under normal circumstances, the gas supply and air pressure of the door and window equipment have fixed parameter requirements, that is, the gas supply flow should reach 0.3, and the air pressure should be able to reach 8 pressures. In the case of multiple doors and Windows, it is necessary to prepare some more gas storage tanks, which depends on the actual situation. If the air pressure is not up to, the accuracy of the door and window processing equipment will have some corresponding effects, and the corresponding processing effect will also have some deviation from the expected phenomenon. Aluminum wood door and window equipment

Third, equipment. There are many types of aluminum doors and Windows equipment, and each type of equipment will have a variety of models, or a variety of equipment parts are different, and so on. Therefore, in the installation and debugging of door and window equipment, it is necessary to coordinate the work of various areas and grasp every detail.

Fourth, in terms of space, in the use of equipment, it is necessary to rationally arrange the placement of equipment, so that the storage of raw materials and sawing processing to the finished doors and Windows are one-stop, and there is no problem that the material needs to be moved to the west in the east.

Fifth, security. It is necessary to make the equipment dedicated, and post the safe use specifications of the equipment and the handling methods of safety accidents.

Sixth, equipment maintenance. The maintenance of the equipment should be carried out by special personnel, and the power should be cut off before the maintenance. After use every day, clean the equipment and scraps, and check the equipment for abnormalities.