Safety operating rules for aluminium door and window end milling machines

Safety operating rules for aluminium door and window end milling machines

1. The operator shall be trained and read the instruction manual carefully before operating the equipment.

2. The operator should wear protective products and tighten the cuffs before operating the equipment. Long hair should be tied into the work cap. Do not wear gloves, do not wear all kinds of jewelry that affect the operation.

3, carefully check the parts of the equipment before starting, it is strictly prohibited to hinder the operation of the items, the workpiece must be fixed firmly.

4, the rotation direction of the tool should be determined before starting, the direction is correct to continue to operate, and the reverse need to be corrected before operation.

5, the operation of the equipment shall not leave the equipment, shall not be close to or touch the high-speed rotating spindle, belt and other parts.

6, the equipment cutting process should often observe the effect of spray lubrication, which has a great impact on the durability of the milling cutter and the cross-section accuracy of the cutting profile.

7, when replacing the tool, you should wear good gloves to avoid skin contact with the sharp edge and injury. The replaced tool should be checked for damage and deformation. Deformed and damaged tools are strictly prohibited. The replaced tool should be properly disposed of.

8. Oil the guide rail should be injected regularly before starting and during operation (once /2 hours). Regular oiling is necessary for the durability and machining accuracy of the equipment.

9, equipment in the maintenance should be cut off the equipment power supply, and choose a professional qualified personnel maintenance.

10. After the work is completed, the equipment should be thoroughly cleaned and lubricating oil should be injected into the moving parts.